- VQ35DE DE and REVUP VQ35DE 350Z 2003-2006 and G35 2003-2007
- >
- 350Z G35 DE/REVUP Tuning Solutions
- >
- Boost E85 Kit
Boost E85 Kit
Included in base kit-
1- AEM 340LPH Fuel Pump with install kit
2- 1050cc Bosch Injectors and PNP Adapters
AEM 340 LPH Fuel pump
http://www.limpmodetuning.com/store/p39/E85_Safe_AEM_320lph_Fuel_Pump_Kit_for_350z_and_G35_.html
E85 Safe. This is our go to pump for most NA E85 and Boost 93 91 applications.
*Some basket modifications are required. We will provide this information if requested.
can be used in 350z G35... does work with 370z with more modifications to the basket and wiring.
• The AEM 320lph E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles
• The 320lph E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter and O-rings. Every AEM 320lph E85-Compatible Fuel Pump is tested to flow 320 lph at 43 PSI before it is packaged for sale
• Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline
• Compact body (39mm diameter x 65mm length)
• Includes pre filter, hose, clamps, flying lead, end cap and rubber buffer sleeve
1050cc E85 Safe Fuel Injectors and Plug and Play harness adaptors for EV14 to Denso (nissan harness)
Uprev GT MAF
The UpRev MAF GT is an upgrade sensor for Nissan Vehicles using Hitachi Part # W0133-1723137 in forced induction applications only.
UpRev MAF GT sensor will read almost 180% the air flow range of the factory sensor while allowing stable idle air flow measurements. If you have a Nissan or Infiniti vehicle that you're adding Forced Induction to, you will need this upgraded MAF Sensor.
UpRev MAF GT sensor works on a wide range of current and older model Nissan and Infiniti vehicles. The diameter of the MAF tube changes, so and exact HP or Flow range cannot be stated for each vehicle. Nissan has generally matched the Factory MAF tube to reach the 4.9v range at 130% over the factory HP. If you're adding Forced Induction you will be out flowing the factory MAF sensor. Uprev has designed this MAF sensor to meet those needs.
*If your vehicle has 2 MAF sensors from the factory, you will need to replace both MAF sensors.
*This unit requires UpRev Flash, or a third party Stand alone ECU for operation. It cannot be used on the factory tune, or with piggy back ECU units alone.
LFR6A11 Plugs Gapped for your build
NGK Lfr6a-11 pregapped for your build.
we offer them in packs of 6 or 8. No need to deal with gapping your own plugs. Just remove from the package and install as they are. We handle the hassle of choosing the correct gap for you.
Email us with your order number and application and we will set them up accordingly.
Perfect Plugs for NA,Nitrous,or Boost. we recommend these in all of our customers vehciles that are no longer using stock ecu calibrations.